Unit 140 - 14480 River Road, Richmond
British Columbia, Canada,
V6V 1L4
Telephone: +1 604 273 6080
|
|
SETWORKS
SYSTEMS:
Delta
RMC Controllers
|
-
High-performance motion controllers for position, velocity,
pressure and force control
-
Smooth
and precise positioning for electric, hydraulic and
pneumatic applications
-
16-bit
or 32-bit interface
-
Communication to PLCs and HMIs through Serial, Ethernet,
Profibus, Discrete I/O
|
RMC 100
Series - (2) to (8) axes stand-alone motion controllers. The
motion control programming can be done within the host PLC that
will issue commands to the RMC, or, for simpler applications,
within the RMC itself.
RMC 70 Series - economic
modular controller for (1) and (2) axes for open or closed loop
applications. Up to (4) expansion modules may be added to the
RMC70, including digital I/O, analog reference and pressure or
force inputs.
|
QB modules
|
-
Allen-Bradley
PLC series 5 programmable module
-
Compatible
with Temposonics position transducers
-
(2)
axes of position control
-
Direct
connect to standard model hydraulic servo-valves
|
The Linear
Positioning Module is a dual-loop position controller occupying
a single slot in the Allen-Bradley 1771 Universal I/O chassis.
It can control servo or proportional hydraulic valves, or some
electric servos. Position is measured with a linear displacement
transducer. The module's analog
outputs (one for each loop) connect to servo or proportional
valves via wiring arm terminals. The module controls speed and
position by adjusting the voltage or current levels of the
analog outputs 500 times each second.
The module also connects to linear
displacement transducers (one for each of the two axes) via
wiring arm terminals. The transducer senses the axis position
and feeds back to the module, thereby closing the control loop.
|
'S' controllers
|
-
RS-485
serial communication with PLC/computer interface
-
Self
contained Temposonics position transducer
-
Single
axis of position control
-
Direct
connect to standard model hydraulic servo-valves
|
Temposonics S
Series ServoSensorTM is a
complete servo controller installed and interfaces inside an MTS
Temposonics S Series sensor. This eliminates costly and complex
PLC setups utilized for set-point control.
The
Temposonics S Series ServoSensorTM
capitalizes on smaller, more powerful microprocessors and
advances in surface-mount technology to eliminate the need for
an external controller. |
|